Emotron FDU regulates flow and pressure by continuously adapting motor speed. Therer is no wasted energy and no unnecessary wear on equipment. A sleep function further reduces energy consumption by pausing the motor when it is not. An automatic pump rinsing function also increases efficiency. Multiple pump or compressor control is a reliable and cost-efficient method of keeping a constant flow or pressure despite varying demands. Emotron FDU controls up to seven drives. Emotron FDU is available in IP20/21and IP54 versions. The robust steel construction in IP54 version allows you to install your AC drive close to the application, which saves the cost of cabinets and long motor cables. The 300-1,500 A units (IP20 modules) are also available in compact CG-designed IP54 cabinets.IP20/21 series 25-244 A are optimised for mounting in control cabinets (IP20) or on electrical room walls (IP21). Emotron FDU has a robust and compact design, with easy access to power terminals and an extended temperature range up to 55 °C.
- Available as robust and certified IP54 metal construction or IP20/21 version
-
All drive sizes are delivered with built-in Category C3 EMC-filter as standard. C3 requirements are fulfilled with 80 m motor cable -
Soft starts minimize start currents and linear stops prevent water hammer -
One Emotron FDU can control up to seven pumps/fans without external control systems -
Energy saving function pauses the motor when it is not required to run to maintain pressure -
Efficiency is increased by setting the pump to run at full speed at certain intervals to rinse out sludge -
Temp/Speed controlled fans assures less noise, a more even drive temperature and higher efficiency -
Load monitor function included as standard -
Detachable multi-language control panel included as standard. Following languages are supported in the control panel: English, Swedish, Dutch, German, French, Spanish, Russian, Italian, Czech and Turkish -
Operation parameters can be set in your process units, for example m3/min. and bar -
Removable control panel with own memory means it is easy to transfer or copy settings -
UL (UL 840) and marine (DNV) approved version available (not IP2Y) -
Liquid cooled version available for sizes above 90 A
Specifications
| Manufacturer: | Emotron |
| Series: | FDU 2.0 |
| Model: | FDU48-013-54 |
| Application: | pumps / fans |
| Capacity, kW: | 5.5 / 4 |
| Current, А: | 13 / 10.4 |
| Main power supply, V: | 400 |
| Phase: | 3 |
| Output frequency, Hz: | 0-400 |
| Enclosure: | IP54 |
| Overload capacity, % per 1 min.: | 120 / 150 |
| Acceleration time, sec: | 0,5-3600 |
| Deceleration time, sec: | 0,5-3600 |
| EMC filter: | built-in |
| Braking unit: | optional |
| Analog input: | 4 |
| Digital input: | 8 |
| Analog output: | 2 |
| Digital output: | 2 |
| Relay output: | 3 |
| RS485 (Modbus RTU): | + |
| PID: | + |
| V/f control mode: | + |
| Vector control with feedback: | – |
| Sensorless vector control: | – |
| Operation temperature, °С: | 0……+40 |
| Storage temperature, °С: | -20……+60 |
| Dimensions (W x H x D), mm: | 203x350x200 |
| Weight, kg: | 12,5 |
