The CFW10 VSD line is designed for the control and speed variation of three-phase induction motors. CFW10 combines modern design with cutting-edge technology, and stands out for its small profile and easy programming. In addition, CFW10 is simple to install and operate, due to its built-in standard keypad.
- V/f control
- IP20 finger-safe enclosure
- Single-phase 110-127 line voltage up to 0.75 kW
- Single-phase 200-240 line voltage up to 2.2 kW
- Three-phase 200-240 line voltage up to 4 kW
- 150% current overload capacity
- DSP controlled PWM output
- 2.5 – 15 kHz ajustable switching frequency
- Four isolated programmable digital inputs
- Programmable relay output
- One isolated programmable analog input
- Motor and VSD protections: overcurrent, motor overload, drive overtemperature, output short circuit, DC link over and undervoltage, and external fault
- Control features: linear and “S” acceleration and deceleration ramps, local/remote control, DC braking, torque boost, motor slip compensation, electronic pot, preset speeds, maximum and minimum adjustable frequency limits, adjustable output current limit, JOG function
- Display readings: motor speed, frequency, voltage, current, last fault, heatsink temperature and drive status
- Ambient: 50 ºC, 1,000 m altitude, 90% humidity, non-condensing.
Specifications
| Manufacturer: | WEG |
| Series: | CFW10 |
| Model: | CFW100016T2024 |
| Application: | general purpose |
| Capacity, kW: | 0,25 |
| Current, А: | 1.6 |
| Main power supply, V: | 200-240 |
| Phase: | 3 |
| Output frequency, Hz: | 0-300 |
| Enclosure: | IP20 |
| Overload capacity, % per 1 min.: | 150 |
| EMC filter: | – |
| Braking unit: | – |
| Analog input: | 1 |
| Digital input: | 4 |
| Analog output: | – |
| Digital output: | – |
| Relay output: | 1 |
| V/f control mode: | + |
| Operation temperature, °С: | -10…..+50 |
| Storage temperature, °С: | -10…..+50 |
| Dimensions (W x H x D), mm: | 132x95x121 |
| Weight, kg: | 0,9 |
